Design of Experiments with Minitab

Home / Continual Process Improvement / Design of Experiments with Minitab
Many experimenters are using an OFAT (one-factor-at-a-time) approach to their experimental designs.  In addition to the issue of inefficiency, this approach fails to identify often crucially important interaction effects among factors.  There are a... Read More

Many experimenters are using an OFAT (one-factor-at-a-time) approach to their experimental designs.  In addition to the issue of inefficiency, this approach fails to identify often crucially important interaction effects among factors.  There are available to experimenters advanced analytical tools based on mathematical techniques and utilising special computer software, which will enable them to gain a deep understanding of their processes, including the impact of interactions among factors, and to do so in the most efficient manner with minimum numbers of experimental runs.  These modern DOE tools will be presented on this training course.

Collapse

What's covered?

Expand/Collapse Expand/Collapse

Day 1
Introduction to Statistics Underlying Experimental Design

  • Mean, variance, standard deviation, degrees of freedom
  • The normal, Student-t and F distributions
  • Normal probability plots
  • Hypothesis testing

Day 2
DOE Terminology

  • Definition of terms such as independent and dependent variables, factors and levels, response, treatment, error and replication

Planning and Organizing Experiments

  • Applying the basic elements of experiment planning and organizing, including determining the experiment objective; selecting factors, responses, and measurement methods; choosing the appropriate design
  • Design Principles
  • Applying the principles of power and sample size, balance, replication, order, efficiency, randomisation and blocking, interaction, and confounding

Design and Analysis of Factorial Experiments

  • Constructing full-factorial designs and applying computational and graphical methods to analyse and evaluate the significance of results
  • Planning the experiment and determining the experimental objective.
  • Explanation of the terminology – responses, factors, levels, replication, randomization, design points, design runs
  • Understanding the statistical importance of avoiding excess variation in experiments – the role of measurement and careful control of the experiments
  • Establishing the basic principles with a two factor and three factor design – explanation of main effects and interactions
  • Analysis of experimental results using the two-sample t-test, ANOVA, and the probability plot
  • Screening out the non-significant factors
  • Understanding how to interpret interaction plots
  • The role of blocking in DOE
  • The need to reduce the number of runs when there are a large number of factors involved – the concept of using fractional factorial designs

Day 3

  • Fractional factorial designs continued
  • Simple and multiple regression and correlation analysis
  • Analysis of residuals
  • Optimization – Response Surface Methodology (RSM)– Modelling the relationship between factors and responses using advanced mathematical techniques and computer software
  • Simultaneously optimising multiple responses

Who should attend?

Expand/Collapse Expand/Collapse
  • Product design and process design engineers and scientists
  • R&D engineers and scientists
  • QC and QA personnel

What will I learn?

Expand/Collapse Expand/Collapse

Participants achieve the following learning outcomes from the programme;

  • Plan designed experiments to include appropriate factors and responses
  • Analyse factor effects and interaction effects using specialist computer software
  • Interpret the outcome of designed experiments so as to choose factor settings for optimum process performance
  • Demonstrate knowledge of the statistics underlying the design of experiments

Who are the tutors?

Expand/Collapse Expand/Collapse

What are the entry requirements?

Expand/Collapse Expand/Collapse

A prior knowledge of basic statistics is recommended.  However, the course will commence with a review of basic statistics, which will be sufficient to provide understanding of the statistical material that will be met during the course.  Participants should have knowledge of mathematical principles, for example, Leaving Certificate mathematics.

How do we train and support you?

Expand/Collapse Expand/Collapse

In-House Courses
For In-House courses the tutor will contact you in advance to discuss the course programme in more detail in order to tailor it specifically for your organisation. Where appropriate and facilitated by the organisation, the course can be run using Minitab or Design Expert software.

Course Manual
Delegates will receive a very comprehensive course manual written by the course tutor, which explains the underlying statistics, describes the principles of experimental design, explains in detail how experiments are designed and analysed, includes examples of several practical case studies, and incorporates completed versions of all the course exercises and graphs, including the output from Minitab computer software.  The course manual will provide a very useful reference for participants undertaking the design and analysis of experiments when they return to their workplace.

What software do we use?

Expand/Collapse Expand/Collapse

Minitab will be demonstrated as part of the training.    Delegates are invited to bring a laptop loaded with either Minitab 16, Minitab 17, or Minitab 18 and they will work through several Minitab exercises throughout the three days of the course.   A free 30 day trial version of Minitab 18 is available on www.minitab.com.   For in-company training courses, there is an option to use the specialist DOE software, Design Expert.  A free 45 day trial version of Design Expert is available for downloading from www.statease.com.

Share this Programme

SnapshotSnapshot

Duration
3 training days
Course Times
9.00am - 5.00pm
Price
£1105

(includes course documentation, lunch and refreshments)

Delivery Mode
This programme is available In-House and on certain Public dates

What They SayWhat They Say

The course was very well organised and the tutor was extremely knowledgeable in the area

– Aengus O’Connell, Manufacturing Engineer, Medtronic Cardio Vascular

Design of Experiments with Minitab

Duration: 3 daysPublic Price: £1,105
Hide
  • 19 - 21 Jun 2018
    Location: Dublin Book Date